EasyManua.ls Logo

ELTEX SMG-4 - Page 41

ELTEX SMG-4
198 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
SMG digital gateway 41
FTP server settings
Store files on FTPwhen checked, CDRs will be transferred to FTP server
Server address/hostnameFTP server IP address
Server portFTP server TCP port
Path on serverdefines path to FTP server folder for CDR storage
Loginusername for FTP server access
Passworduser password for FTP server access
Settings of Redundant FTP Server
Save files on FTPwhen checked, CDRs will be transferred to a redundant FTP server.
Server address/hostnameIP address of the redundant FTP server.
Server portTCP port of the redundant FTP server.
Path on servera path to the redundant FTP server directory to store CDRs.
Loginusername for access to the redundant FTP server.
Passworduser password for access to the redundant FTP server.
When the FTP server is not available, CDRs will be saved to the device RAM. 30 MB are allocated
for storing CDR files. If the memory is full up to a specified value, a fault will be indicated. For
CDR file saving indication, see section 1.6 LED Indication.
When a certain alarm level is reached, the system sends the corresponding SNMP trap.
Other Settings
Save unsuccessful callswhen checked, stores unsuccessful calls (not resulted in conversation)
into CDR files.
Save empty fileswhen checked, saves CDR files containing no records.
Write redirecting numberwhen checked, an additional field, Redirecting Number, is added to
CDR; otherwise, the additional Redirecting Number field will not be added when a call is
redirected, and the number which originated the redirection will be saved into the Calling Party
Number parameter.
Write redirecting markwhen checked, CDR will contain an additional field, Redirection Tag.
Write call categorywhen checked, CDR will contain an additional field, Calling Party Category.
Modifiers for incoming numbers
Incoming number modifiers are the modifiers, which modify any CDR fields containing subscriber numbers
and apply to these fields before a call proceeds through a numbering schedule.
CdPNintended for modifications based on analysis of the callee number received from the
incoming channel.
CgPNintended for modifications based on analysis of the caller number received from the
incoming channel.
RedirPNintended for modifications based on analysis of the number of the subscriber, which
redirected the call received from the incoming channel.

Table of Contents

Related product manuals