44 SMG digital gateway
TrunkGroup00—caller name or incoming trunk name (TG);
650000—caller name on SMG input (before modification on incoming TG);
650000—caller name on SMG output (after modification on incoming and outgoing TG);
0.0.0.0—IP address where the call is directed to (a call to TDM appears as 0.0.0.0);
trunk-SS7—destination type;
TrunkGroup00—callee name or outgoing trunk name (TG);
80123456789—callee number on SMG input (before modification on incoming TG);
80123456789—callee number on SMG output (after modification on incoming and outgoing TG);
2013-10-08 15:10:12—call received time;
2013-10-08 15:10:16—connection termination time.
The caller number will have the following format:
For normal calls—the number from the Calling Party Number field (the PRI and SS-7 protocols) or
the From field (SIP).
When an IAM (the SS7 protocol) or SETUP (the PRI protocol) message received with redirection
information—the number from the Redirecting Number field.
When message 302 (the SIP protocol) is received—the number from the To field.
The callee number will have the following format:
For normal calls—the number from the Called Party Number field (the PRI and SS-7 protocols) or
the To field (SIP).
When an IAM (the SS7 protocol) or SETUP (the PRI protocol) message received with redirection
information—the number from the Called Party Number field.
When message 302 (the SIP protocol) is received—the number from the Contact field.
When the Save Call Category checkbox is checked, two additional fields are added to this record:
2013-10-08 15:10:14;2;16;user answer;0.0.0.0;trunk-SS7;TrunkGroup00;650000;650000;1;3;0.0.0.0;trunk-
SS7;TrunkGroup00;80123456789;80123456789;2013-10-08 15:10:12;2013-10-08 15:10:16;
where
1—caller category on input (before modification on incoming TG);
3—caller category on output (after modification on incoming and outgoing TG).
When the Save Redirecting Number checkbox is checked, two additional fields are added:
;2013-10-08 18:27:13;1;16;user answer;0.0.0.0;trunk-
SS7;TrunkGroup00;650000;37650000;1;1;650016;3835650016;0.0.0.0;trunk-
SS7;TrunkGroup00;80123456789;58123456789;2013-10-08 18:27:09;2013-10-08 18:27:14;
where
650016—the redirecting number (the number that originated the redirection) on SMG input (before
modification on incoming TG)—the number from the Redirecting Number field (the PRI and SS-7 protocols) or
the To field (SIP).
3835650016—the redirecting number on SMG output (after modification on incoming and outgoing TG)—the
number from the Redirecting Number field (the PRI and SS-7 protocols) or the To field (SIP).
In this case, the number from the Calling Party Number field (the PRI and SS-7 protocols) or the From field
(SIP) will be specified as a caller number.
To Next Page
Loading...
