78 SMG digital gateway
Options configuration for 'Transit E1' mode
Options of modem and fax detection are not used in 'Transit E1' mode. The tab is not available in this
mode.
4.1.7.8 Trunk Directions
A trunk direction is a set of trunk groups united in one direction. When a call is performed to a trunk
direction, the order of selection of the trunk groups in this direction can be chosen.
To create, edit, or remove trunk directions, use the Objects—Add Object, Objects—Edit Object, or
Objects—Remove Object menus and the following buttons:
— Add Direction;
— Edit Direction Parameters;
— Remove Direction.
To access a trunk direction, the device configuration should include prefixes which perform transition to
this direction.
Name—name of the trunk direction.
TrunkGroup select mode—order of trunk group selection in the direction:
– Sequential forward—all trunk groups of the direction are selected in turns beginning from
the first one in the list;
– Sequential back—all trunk groups of the direction are selected in turns beginning from the
last one in the list;
– From the first and forward—the first free trunk group of the direction is selected
beginning from the first one in the list;
– From the last and back—the first free trunk group of the direction is selected beginning
from the last one in the list.
A list of trunk groups in the direction:
To Next Page
Loading...
