EasyManuals Logo

ELTRA CS-580A User Manual

ELTRA CS-580A
70 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #10 background imageLoading...
Page #10 background image
10
3 Packaging, Transport and Installation
3.1 Packaging
The packaging has been adapted to the mode of transport. It complies with the generally
applicable packaging guidelines.
Before packing, the analyzer must be wrapped in plastic foil to protect it from moisture and dust,
and then be placed in a wooden case. The wrapped analyzer should be surrounded by a layer
of plastic foam (or at least chips) of at least 10cm, in order to avoid any damage during
transport.
Especially the foam where the analyzer is put on is very important. It should neither be too hard
nor too soft. When the foam is too soft, the analyzer will practically touch the wood. Fix the foam
on the bottom of the wooden case by gluing.
The small loader (with 36 trays) can be packed in the wooden case together with the analyzer.
The bigger loaders (for 104 and 130 crucibles) however, are to be packed in separate carton
boxes and protected by foam or another shock absorbing material. The transportation of these
carton boxes has to be made on pallet.

Table of Contents

Other manuals for ELTRA CS-580A

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the ELTRA CS-580A and is the answer not in the manual?

ELTRA CS-580A Specifications

General IconGeneral
BrandELTRA
ModelCS-580A
CategoryMeasuring Instruments
LanguageEnglish

Related product manuals