Mortal danger from electric shock while replacing/installing the heating
elements
Exposed power contacts - High Voltage
− An electric shock can cause injuries in the form of burns and cardiac
arrhythmia, respiratory arrest or cardiac arrest.
• Set the mains switch of the analyzer to position 0 and pull the
mains plug of the mains socket.
• The task of inserting/replacing the heating elements may only be
performed by a trained electrician or Eltra service personnel
Scalding/burns
Hot furnace / combustion tube / analyzer parts
− Parts of the analyzer can be very hot.
• Wait before start working until the analyzer is cooled down.
To Next Page
Loading...
Need help?
General
