7.3 Reagent tubes filling
7.3.1 Reagent tube replacing
Scalding/burns
Hot furnace / combustion tube / analyzer parts
− Parts of the analyzer can be very hot.
• Use heat protecting gloves.
Injuries in the form of cuts and other personal injuries
Danger from glass splitters
– Injuries in the form of cuts can be caused by damaged sample flasks and
glass splitters.
• Replace damaged sample flasks
• Do not touch glass splitters with your hands.
Danger of bursting
− Defective reagent tubes may cause injuries in the form of cuts and other
personal injuries.
• Before installing the new reagent tubes, check if they are damaged.
• Wear protective gloves and safety glasses when installing/removing
the reagent tubes.
Danger of toxication and personal injuries
− Some chemicals may cause a fatal toxication or dangerous skin corrosion.
• Refer to the material safety data sheet of the used substances.
• Always wear the necessary personal protection equipment
• Never eat or drink close to the chemical substances.
To Next Page
