nas_disk
155
The nas Commands
server = server_5 addr=c48t1l2
Where:
EXAMPLE #3 For the Celerra Network Server with a CLARiiON backend, to
rename a disk, type:
$ nas_disk -rename d7 disk7
id = 7
name = disk7
acl = 0
in_use = True
size (MB) = 273709
type = CLSTD
protection= RAID5(4+1)
stor_id = APM00042000818
stor_dev = 0012
volume_name = disk7
storage_profiles = clar_r5_performance
mirrored = False
servers = server_2,server_3,server_4,server_5
server = server_2 addr=c0t1l2
server = server_2 addr=c32t1l2
server = server_2 addr=c16t1l2
server = server_2 addr=c48t1l2
server = server_3 addr=c0t1l2
server = server_3 addr=c32t1l2
server = server_3 addr=c16t1l2
server = server_3 addr=c48t1l2
server = server_4 addr=c0t1l2
server = server_4 addr=c32t1l2
server = server_4 addr=c16t1l2
server = server_4 addr=c48t1l2
server = server_5 addr=c0t1l2
server = server_5 addr=c32t1l2
Value Definition
id ID of the disk (assigned automatically).
name name of the disk.
acl access control level value of the disk.
in_use used by any type of volume or file system.
size (MB) total size of disk.
type type of disk contingent on the backend attached. CLSTD, CLATA,
CMSTD and CMATA are for CLARiiON, and STD, BCV, R1BCV,
R2BCV, R1STD, R2STD, ATA, R1ATA, R2ATA,BCVA, R1BCA,
R2BCA are for Symmetrix.
protection the type of disk protection that has been assigned.
stor_id ID of the storage system associated with the disk.
stor_dev ID of the device associated with the disk.
volume_name name of the volume residing on the disk.
servers lists the servers that have access to this disk.
storage_profile the storage profiles to which the disk belongs.
mirrored indicates whether the disk is mirrored or not.
addr path to backend (SCSI address).
To Next Page
Loading...
Need help?
General
