EMC Celerra

180
Celerra Network Server Command Reference Manual
The nas Commands
$ nas_fs -size ufs1
total = 100837 avail = 100836 used = 0 ( 0% ) (sizes in MB) (blockcount = 209715200)
volume: total = 102400 (sizes in MB) ( blockcount = 209715200 )
When a file system is mounted, the size info for the volume and a file
system are displayed, as well as the number of blocks that are used.
Where:
EXAMPLE #7 To rename a file system from ufs1 to ufs2, type:
$ nas_fs -rename ufs1 ufs2
id = 38
name = ufs2
acl = 0
in_use = True
type = uxfs
worm = off
volume = v171
pool = clar_r5_performance
member_of = root_avm_fs_group_3
rw_servers= server_2
ro_servers=
rw_vdms =
ro_vdms =
auto_ext = no,virtual_provision=no
stor_devs = APM00042000818-001F,APM00042000818-001D,APM00042000818-0019,APM00042
000818-0016
disks = d20,d18,d14,d11
disk=d20 stor_dev=APM00042000818-001F addr=c0t1l15 server=server_2
disk=d20 stor_dev=APM00042000818-001F addr=c32t1l15 server=server_2
disk=d18 stor_dev=APM00042000818-001D addr=c0t1l13 server=server_2
disk=d18 stor_dev=APM00042000818-001D addr=c32t1l13 server=server_2
disk=d14 stor_dev=APM00042000818-0019 addr=c0t1l9 server=server_2
disk=d14 stor_dev=APM00042000818-0019 addr=c32t1l9 server=server_2
disk=d11 stor_dev=APM00042000818-0016 addr=c0t1l6 server=server_2
disk=d11 stor_dev=APM00042000818-0016 addr=c32t1l6 server=server_2
See Example #1 and Example #3 for a description of command
output. The clar_r5_performance storage pool is available with the
CLARiiON backend.
EXAMPLE #8 To list all of the file systems in the NAS database, type:
$ nas_fs -list
id inuse type acl volume name server
1 n 1 0 10 root_fs_1
2 y 1 0 12 root_fs_2 1
Value Definition
total total size of the file system.
blockcount total number of blocks used.