EMC Celerra

324
Celerra Network Server Command Reference Manual
The server Commands
if=cge0 l=172.24.102.242 b=172.24.102.255 mac=0:60:16:4:35:4f
wins=172.24.102.25
Password change interval: 0 minutes
Where:
EXAMPLE #6 To configure the use of an external usermapper host with the IP
address 172.24.102.20, type:
$ server_cifs server_2 -add usrmapper=172.24.102.20
server_2 : done
EXAMPLE #7 To display the CIFS configuration for NT4 with external usermapper,
type:
$ server_cifs server_2
server_2 :
256 Cifs threads started
Security mode = NT
Max protocol = NT1
I18N mode = UNICODE
Home Directory Shares ENABLED, map=/.etc/homedir
Usermapper auto broadcast suspended
Usermapper[0] = [172.24.102.20] state:available
Default WINS servers = 172.24.103.25:172.24.102.25
Value Definition
Cifs threads started number of CIFS threads used when the CIFS service was started.
Security mode user authorization mechanism used by the Data Mover.
Max protocol maximum dialect supported by the security mode.
I18N mode I18N mode (unicode or ASCII).
Home Directory Shares whether Home Directory shares are enabled.
map home directory used by the Data Mover.
Usermapper auto
broadcast enabled
usermapper is using its broadcast mechanism to discover its servers. This only displays when the
mechanism is active. It is disabled when you manually set the Usermapper server addresses.
Usermapper IP address of the server(s) running the Usermapper service.
state current state of Usermapper.
Default WINS servers address(es) of the default WINS server(s).
Enabled interfaces Data Mover’s enabled interface(s).
Disabled interfaces Data Mover’s disabled interface(s).
Unused Interface(s) interface(s) not currently used by the Data Mover.
RC reference count indicating the number of internal objects (such as client contexts) using the CIFS
server.
SID security ID of the domain.
DC Domain controller(s) used by the Data Mover. Depending on the number of DCs in the domain,
this list may be large.
ref number of internal objects using the Domain Controller.
time Domain Controller response time.
Alias(es) alternate NetBIOS names assigned to the CIFS server configuration.
if interface(s) used by the CIFS server.
Password change
interval:
the amount of time between password changes.