380
Celerra Network Server Command Reference Manual
The server Commands
EXAMPLE #18 To display status information for the target, t1, type:
$ server_iscsi server_2 -target -info t1
server_2 :
Target Alias Name: t1
Target iSCSI Name: iqn.1992-05.com.emc:apm000438070430000-1
Serial Number: 1
Portal Group Tag: 100
Portal: 172.24.102.242:3260
Portal Group Tag: 200
Portal: 172.24.102.243:3260
Logical Units:
0 : (Production) fsid=22 size=106496MB alloc=0MB dense
path=/ufs1/fs22_T1_LUN0_APM00043807043_0000/fs22_T1_LUN0_APM00043807043_0000
1 : (Production) fsid=22 size=10240MB alloc=0MB virtually_provisioned
path=/ufs1/fs22_T1_LUN1_APM00043807043_0000/fs22_T1_LUN1_APM00043807043_0000
2 : (Production) fsid=22 size=10240MB alloc=0MB dense
path=/ufs1/fs22_T1_LUN2_APM00043807043_0000/fs22_T1_LUN2_APM00043807043_0000
Connected Initiators:
iqn.1991-05.com.microsoft:winserver1.nasdocs.emc.com
Where:
state state of the iSNS server. Possible states are:
SYNC—The iSNS client is OK.
VIRGIN—The iSNS client is not in use—there are no targets or portals configured.
INDOUBT—The iSNS client cannot currently contact the iSNS server and is retrying.
NOTSYNC—The iSNS client has experienced multiple failures attempting to contact the iSNS server and is
retrying.
DEAD—The iSNS client cannot contact the iSNS server. Still retrying at a lower frequency.
entity name of the network entity that serves as a container for iSCSI targets and portal objects on the Data Mover.
source name of the iSCSI target used as the source attribute in iSNS requests that require source identification.
ESI support whether Entity Status Inquiry (ESI) is supported as the means for refreshing the entity registration.
ESI port TCP port that the iSNS client service listens to for incoming ESI messages.
ESI Time last time the ESI was received from the iSNS server or UNKNOWN if never.
timeout network timeout value (in milliseconds) for communication with the iSNS server.
trace whether extensive tracing output of iSNS messages, both incoming and outgoing, is enabled (TRUE) or
disabled (FALSE).
PG support whether portal groups are supported; if not, all portals are implicitly placed in one portal group.
Value Definition
Target Alias Name alias for the iSCSI target’s qualified name.
Target iSCSI Name iSCSI qualified name of the target.
Serial Number unique, Celerra-wide serial number for the target.
Portal Group Tag portal groups used by the target.
Portal IP address and port of the portals in the portal group.
Logical Units logical units (LUNs) assigned to the target.
fsid ID the file system containing the LUN.
size reserved size of the LUN in MBs.
alloc amount of data currently stored in the LUN.
dense storage method used by the LUN.
path file system path to the LUN.
Connected Initiators qualified name of the initiators logged in to the target.
To Next Page
Loading...
Need help?
General
