EMC Celerra User Manual

server_nfs
425
The server Commands
EXAMPLE #14 To delete a mapping record, type:
$ server_nfs server_2 -secnfs -mapper -mapping -delete name=nfsuser1
server_2 : done
EXAMPLE #15 To enable the NFSv4 service on server_2, type:
$ server_nfs server_2 -v4 -service -start
server_2 : done
EXAMPLE #16 To display the status of the NFSv4 service, type:
$ server_nfs server_2 -v4
server_2 :
-------------- nfsv4 server status ---------------
* Service Started *
-------- NFSv4 Clients --------
Confirmed Clients : 1
UnConfirmed Clients : 0
--------------------------------
--------- NFSv4 State --------
Opens : 4
Locks : 0
Delegations: 4
--------------------------------
--------------------------------------------------
Where:
EXAMPLE #17 To display all NFSv4 clients, type:
$ server_nfs server_2 -v4 -client -list
server_2 :
------------ nfsv4 server client list ------------
hostname/ip : Index
NFSCLIENT1.nasdocs.emc.com : 0xa5400000
--------------------------------------------------
Value Definition
Confirmed Clients active client (ready to work).
UnConfirmed Clients client in the process to establishing context.
Number of users to be removed in non-debug images.
Longest List to be removed in non-debug images.
Shortest List to be removed in non-debug images.
Greatest depth to date to be removed in non-debug images.
Average List length to be removed in non-debug images.
Opens number of open files
Locks number of locks being held.
Delegations number of granted delegations.
Free to be removed in non-debug images.

EMC Celerra Specifications

General

Brand	EMC
Model	Celerra
Category	Server
Language	English