EMC Celerra

56
Celerra Network Server Command Reference Manual
The fs Commands
See Example #2 for a description of command output.
EXAMPLE #9 To display Celerra FileMover connection information for ufs1, type:
$ fs_dhsm -info ufs1
ufs1:
state = enabled
offline attr = on
popup timeout = 0
backup = passthrough
read policy override = none
log file = on
max log size = 10MB
See Example #1 for a description of command output.
EXAMPLE #10 To list Celerra FileMover connections, type:
$ fs_dhsm -connection ufs1 -list
id name cid
29 ufs1 0
29 ufs1 1
29 ufs1 2
EXAMPLE #11 To modify the Celerra FileMover connection for ufs1, type:
$ fs_dhsm -modify ufs1 -popup_timeout 10 -backup offline -log on -max_log_size 25
-offline_attr on -read_policy_override full
ufs1:
state = enabled
offline attr = on
popup timeout = 10
backup = offline
read policy override = full
log file = on
max log size = 25MB
cid = 0
type = CIFS
secondary = \\winserver2.nasdocs.emc.com\dhsm1\
state = enabled
read policy override = pass
write policy = full
local_server = DM102-CGE0.NASDOCS.EMC.COM
admin = nasdocs.emc.com\Administrator
wins = 172.24.102.25
cid = 1
type = NFSV3
secondary = 172.24.102.115:/export/dhsm1
state = enabled
read policy override = full
write policy = full