EasyManua.ls Logo

EMC DS-4900B - RTC Battery; Electrical Safety

EMC DS-4900B
86 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
6-18
EMC Connectrix B Series DS-4900B Version 5.1 Hardware Reference Manual
DS-4900B Specifications
CAUTION
!
Use only optical transceivers that are qualified by EMC
Corporation and comply with the FDA Class 1 radiation
performance requirements defined in 21 CFR Subchapter I, and
with IEC 825-2. Optical products that do not comply with these
standards might emit light that is hazardous to the eyes.
RTC battery
CAUTION
!
Do not attempt to replace the real-time clock (RTC) battery. There is
danger of explosion if the battery is incorrectly replaced or
disposed of. Contact your EMC Customer Service Representative if
the real-time clock begins to lose time.
Electrical safety
CAUTION
!
This switch might have more than one power cord.To reduce the
risk of electric shock, disconnect both power cords before
servicing.
CAUTION
!
Connect the power cord only to a grounded outlet.
CAUTION
!
This product is designed for an IT power system with
phase-to-phase voltage of 230V. After operation of the protective
device, the equipment is still under voltage if it is connected to an
IT power system.

Table of Contents