13
Units setup.
To grant access into “Setup” menu press the wheel from main screen, choose “Setup” and enter the PASSCODE.
Move on “UNITS” and press the wheel.
Once into submenu press wheel twice on “UNITS” and rotate to choose between “US” unit standard or “IS” international
unit standard. See table for differencies.
EUROPE IS (Internationl Standard) USA
Date (DD/MM/YY) Date (MM/DD/YY)
Time 24h Time AM / PM
°C Celsius °F Farhenheit
Liters Gallons
To change conductivity reading scale from uS to PPM move wheel on “MEASURE UNIT” and press it twice.
To end procedure move cursor on “EXIT” and press wheel to proceed to “Save” request screen. Move wheel on “YES”
to save or “NO” to discard changes.
To Next Page
Loading...
Need help?
General
