October 2019
Installation, Operation and Maintenance Manual
MAN-02-04-97-0713-EN Rev. 1
2
General Safety Instructions
Section 1: General Safety Instructions
1.2.1 Marking
Table 1.
IECEx INE XX.ZZZZ IECEx reference certicate (CoC)
XX ATEX ZZZZ ATEX reference certicate
0080 Notied body for ATEX quality assurance (INERIS)
II Group II (surface industries)
2 Category 2 apparatus
G Explosive atmospheres caused by gas, mists, or
vapors
D Explosive atmospheres caused by gas and dusts
P66/68 Degree of protection
FM18US0279X FM reference certicate for USA
FM18CA0134X FM-c reference certicate for Canada
Table 2.
Hazardous Zones Zone Categories according to 2014/34/EU Directive
Gas, mists, or vapors 0 1G
Gas, mists, or vapors 1 2G or 1G
Gas, mists, or vapors 2 3G or 2G or 1G
Dust 20 1D
Dust 21 2D or 1D
Dust 22 3D or 2D or 1D
Table 3. Equipment Protection Level (EPL) EN 60079-14
Explosive atmosphere Zone EPL
Gas, mists, or vapors 0 1G
Gas, mists, or vapors 1 2G or 1G
Gas, mists, or vapors 2 3G or 2G or 1G
Dust 20 1D
Dust 21 2D or 1D
Dust 22 3D or 2D or 1D
1.3 Applicable Standards and Regulations
Table 4.
EN ISO 12100
Safety of machinery - General principle for design - Risk assessment and risk
reduction
EN 60204-1 Safety of machinery - Electrical equipment of industrial machines
2006/42/EC Machinery directive
2014/35/EU Low voltage directive
2014/30/EU EMC directive
2014/34/EU ATEX directive
2014/53/EU RED directive
FM (for USA) FM3600, FM3810, ANSI/ISA 60079-0, ANSI/ISA 60079-1, ANSI/NEMA 250
FM-c (for Canada)
CAN/CSA C22.2 No. 60079-0, CAN/CSA C22.2 No. 60079-1, CAN/CSA
61010-1, CSA-C22.2 No. 94