Installation, Operation and Maintenance Manual
MAN-02-04-97-0713-EN Rev. 1
October 2019
117
Appendix
Appendix
A.3 Applicable General Standards and Regulations
Table A-3.
2006/42/EC Machinery directive
2014/30/EU EMC directive
2014/35/EU Low voltage directive
2014/34/EU ATEX directive
EN ISO 12100-1
Safety of machinery - Basic concepts, general principles for design.
Part 1 - Basic terminology, methodology.
EN ISO 12100-2
Safety of machinery - Basic concepts, general principles for design.
Part 2 - Technical principles and specication.
EN 60079-0: 2012/A11:2013 IEC 60079-0: 2011
EN 60079-1: 2014 IEC 60079-1: 2014
EN 60079-7: 2015 IEC 60079-7: 2015
EN 60079-11: 2012 IEC 60079-11: 2011
EN 60079-31: 2014 IEC 60079-31: 2013
EN ISO 80079-36:2016 ISO 80079-36:2016
EN ISO 80079-37:2016 ISO 80079-37:2016
A.4 Terms and Conditions
Emerson guarantees every product to be free from defects and to conform to industry
standards. Unless otherwise specied, the warranty period is one year from the date of
installation by the rst user or eighteen months from the date of shipment to the rst user,
whichever occurs rst.
No warranty is given for products that are subject to improper storage, improper
installation, misuse, or are modied or repaired by unauthorized personnel.
Repair work resulting from improper use will be charged at standard rates.
A.5 Manufacturer’s Liability
Emerson will not accept any liability in the event of:
• Use of product in a fashion that contravenes local safety at work legislation.
• Incorrect installation relating to, disregard for, or incorrect application of the
instructions as provided on the product nameplate and in the Installation,
Operation, and Maintenance Manual MAN-02-04-97-0713 and Appendix A within.
• Modication of the product without Emerson authorization.
• Work done on the product by unqualied or unsuitable personnel.
To Next Page
Loading...
Need help?
General
