Installation, Operation and Maintenance Manual
MAN-02-04-97-0713-EN Rev. 1
October 2019
45
Section 6: Local Controls
Local Controls
Nameplate
This menu includes a series of data identifying the actuator characteristics, service, and
utilization mode. The data are entered by the manufacturer and can only be viewed
(not edited; as such, this menu is only available in View mode).
List of routines:
• serial number
• actuator type
• torque/thrust
• actuator speed
• power supply
• motor data
• test date
• wiring diagram
• enclosure
• certicate
• lubricant
• revision
• torque sensor
Valve Data
This menu includes a series of data relevant to the valve. The valve manufacturer and end
user should enter the data.
List of routines:
• tag name (max 28 characters)
• manufacturer (max 28 characters)
• break OP torque (max 28 characters)
• serial number (max 28 characters)
• break CL torque (max 28 characters)
• max stem thrust (max 28 characters)
• ange type (max 28 characters)
To Next Page
Loading...
