• No tuning needed for no-load up to 10:1 inertia mismatch.
• High performance tuning based on inertia ratio, friction and
response with PowerTools software (available separately).
• High resolution encoder.
• Four velocity presets.
• Programmable pulse follower ratio.
• Pulse mode input type selectable between differential and
single-ended.
• Removable connectors for easy installation.
• Single cable connection to EMERSON Motion Control’s
AXIMA 2000 and 4000 multi-axis controllers.
• Scalable Encoder Output in one line per revolution
increments.
• Travel Limit Function in Torque mode.
• Access to bus voltage for external shunt.
• Able to operate non-EMERSON motors with encoders.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...
