Emerson Epsilon Eb-202 - Safety Considerations; Safety Considerations Overview; Critical Safety Precautions; Enclosure Design Requirements

7
Safety Considerations
Overview
This chapter describes the safety issues which need to be
addressed in the system design when using this product.
Specifically, it includes:
• Safety Precautions
• Enclosure Design
• Setting Up, Commissioning and Maintenance
• Safety of Machinery
Safety Precautions
This product is intended for professional incorporation into a
complete system. If you install the product incorrectly, it may
present a safety hazard. The product and system may use high
voltages and currents, carries a high level of stored electrical
energy, or is used to control mechanical equipment which can
cause injury.
You should give close attention to the electrical installation
and system design to avoid hazards either in normal operation
or in the event of equipment malfunction. System design,
installation, commissioning and maintenance must be carried
out by personnel who have the necessary training and
experience. Read and follow this safety information and the
instruction manual carefully.
Enclosure
This product is intended to be mounted in an enclosure which
prevents access except by trained and authorized personnel,
and which prevents the ingress of contamination. This product
E
p
s
i
l
o
n
E
b
D
i
g
i
t
a
l
S
e
r
v
o
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com