Emerson Epsilon Eb-202 - Encoder Output Signal Wiring

41
Installation
Figure 22: Analog Command, Single Ended Output Wiring
Diagram
Encoder Output Signal Wiring
The Epsilon drive encoder outputs meet RS-422 line driver
specifications and can drive up to ten RS-422 signal recievers.
The default encoder output resolution is set so it outputs the
actual motor encoder resolutions. The standard MG and NT
motors have 2048 lines per revolution. This resolution is
adjustable in one line per revolution increments with
PowerTools software. With the range of one line per revolution
to the actual motor encoder density.
Command Connector
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com