Emerson Epsilon Eb-202 - Installation Procedures; Installation Overview; Basic Installation Notes; Electromagnetic Compatibility (EMC) Guidance

11
Installation
Overview
This chapter describes how to install the drive, motor and
cables. Specifically, it includes:
• Basic Installation Notes
• Mechanical Installation
• Electrical Installation
• Serial Communications
Basic Installation Notes
You are required to follow all safety precautions during start-up such as
providing proper equipment grounding, correctly fused power and an
effective Emergency Stop circuit which can immediately remove power
in the case of a malfunction. See the "Safety Considerations" section for
more information.
Electromagnetic Compatibility (EMC)
Drives are designed to meet the requirements of EMC. Under
extreme conditions a drive might cause or suffer from
disturbances due to electromagnetic interaction with other
equipment. It is the responsibility of the installer to ensure
that the equipment or system into which the drive is
incorporated complies with the relevant EMC legislation in the
country of use.
The following instructions provide you with installation
guidance designed to help you meet the requirements of the
EMC Directive 89/336/EEC.
E
p
s
i
l
o
n
E
b
D
i
g
i
t
a
l
S
e
r
v
o
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com