Emerson Epsilon Eb-202 - Specifications; Specifications Overview; Epsilon Drive Specifications

73
Specifications
Overview
This chapter describes the drive/motor specifications and cable
diagrams. Specifically, it includes:
• Drive and Motor Specifications
• Power Dissipation
• Speed Torque Curves
• Epsilon Drive Dimensions
• MG Motor Dimensions and NT Motor dimensions
• Cable Diagrams
• Vendor Contact Information
Drive Specifications
Epsilon Series
Power Requirements
42 - 264 VAC, 1 Ø, 47 - 63 Hz
240 VAC for rated performance or 12 - 375
VDC when using an A.P.S. Logic Supply Input
and disabled Low DC Bus alarm.
Auxiliary Power Supply/
Auxiliary Logic Power Input
For logic backup, 24 VDC, 0.5A
Switching Frequency
20 kHz
Power Supply Output
5 VDC, 250 mA maximum for master encoder
usage
Efficiency - Drive
Eb-202/203: 93% at full rated output power
Eb-205: 95% at full rated output power
Ingress Protection (IP) Rating
Drive: IP20
MG motors: IP65
NT motors: IP65/IP54
Molded motor and feedback cables: IP65
E
p
s
i
l
o
n
E
b
D
i
g
i
t
a
l
S
e
r
v
o
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com