Epsilon Eb Digital Servo Drive Installation Manual
Rebooting the Drive
To reboot the drive, cycle power or select the Reboot Drive
command from the Device menu. This command reboots the
drive attached to the active Configuration Window.
Watch Window
This feature allows you to customize a window to monitor drive
parameters which you select from a complete list of drive
parameters. From this window you can watch the parameters
you selected in real time. This feature is only available when
you are online with the drive.
Note
You cannot change the values of the parameters while they
are being displayed in the Watch Window. The parameter in
the setup screens will look like they have been changed
when they actually have not. To update a parameter, delete
it from the Watch Window selection.
Note
It is normal to have the Watch Window show up with the
three motor parameters already selected if the motor
parameters window has been accessed previously. If you do
not need to view them, simply push the Clear All button and
select the parameters you wish to view.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...
