Epsilon Eb Digital Servo Drive Installation Manual
Warning
Do not open the APS jumper access panel until at least six
minutes after the main AC power has been removed from
the L1 and L2 terminals.
Note
Connecting 24V common on the APS to chassis ground
reduces offset voltage in Analog Diagnostic Outputs.
Figure 13: Multiple APS Wiring Diagram
Front ViewFront View
24 VDC
J1
1 A
Fuse
J1
1 A
Fuse
+
-
Single point PE
ground
(recommended)
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...
