Chapter 5 iCOM Controller 31
Liebert. PEX+Series Precision Air Conditioner User Manual
5.6.7 SENSOR DATA
You can monitor the data acquired by the sensors through the SENSOR DATA menu. The values are read only, no
setting or change is allowed. The parameters are described in Table 5-7.
Table 5-7 Descriptions of SENSOR DATA parameters
Ext Air Sensor A
Temperature
Ext Air Sensor A Humidity
Ext Air Sensor B
Temperature
Ext Air Sensor B
Temperature
Relative humidity of
sensor B
Ext Air Sensor C
Temperature
Ext Air Sensor C
Temperature
Ext Air Sensor C
Temperature
Ext Air Sensor C Humidity
Ext Air Sensor C Humidity
Ext Air Sensor A
Temperature
Ext Air Sensor A Humidity
Ext Air Sensor A Dew Point
Temp
Remote Sensor Temperature
Temperature of digital
scroll 1
Remote Sensor Temperature
Temperature of digital
scroll 2
Remote Sensor Temperature
Daily high temperature
(hour)
Remote Sensor Temperature
Daily high temperature
(minute)
Remote Sensor Temperature
Daily high temperature
(second)
Remote Sensor Temperature
Remote Sensor Temperature
Daily low temperature
(hour)
Remote Sensor Temperature
Daily low temperature
(minute)
Remote Sensor Temperature
Daily low temperature
(second)
Remote Sensor Temperature
Rem Sensor Control is set to:
Daily high humidity (hour)
# of Remote Control
Sensors:
Daily high humidity
(minute)
Remote Sensor Unit
Average:
Daily high humidity
(second)
Remote Sensor Unit
Maximum:
Remote Sensor System
Average:
Daily low humidity (hour)
Remote Sensor System
Maximum:
Daily low humidity
(minute)
Daily low humidity
(second)
To Next Page