58 Chapter 6 Application Of INTELLISLOT
Liebert. PEX+Series Precision Air Conditioner User Manual
3. Type ‘1’ and the following figure will appear.
4. Type ‘1’ and select the Modbus protocol, and the following figure will appear.
5. Type ‘3’ and select the ID used to communicate between the communication card and the host, and the following
figure will appear.
6. Type the server ID following the command prompt, and the following figure will appear.
7. Type ‘4’ and the following figure will appear.
8. Type ‘1’, ‘2’ or ‘3’ to select the baud rate used to communicate with the host, and the following figure will appear.
To Next Page