6 Display and operation
6.1 Main display
The transmitter has a four line display.
See Figure 6-1. The display can be customized to meet your requirements. See Section 6.5.
Fault or warning messages, if appropriate, appear at the bottom of the screen. See
Section 13.1.
Main displayFigure 6-1:
The following abbreviations are used in the lower two lines of the display. The number
following the display refers to the sensor, alarm relay, or output.
O Output
T Temperature (live)
Tm Temperature (manual)
M Measurement
AL Alarm relay
I Sensor current (chlorine)
Display and operation
Manual 27
To Next Page
Loading...
Need help?
General
