117
Reference Manual
00809-0100-4021, Rev GC
Section 3: HART commissioning
April 2014
HART® commissioning
6. Select 1 Enable to enable the Min/Max Tracking feature and press ENTER.
7. Select which parameters you would like to track the minimum and maximum
temperatures for. Choose between Parameter 1, Parameter 2, Parameter 3, Parameter
4, or all Parameters.
8. Select which variable to track with the selected parameter. Choose between Sensor 1,
Sensor 2, Average Temperature, First Good Temperature, Differential Temperature, and
Terminal Temperature. Press ENTER.
9. Repeat steps 7 - 8 until all desired parameters have been assigned a variable to track.
Select 6 Exit when finished.
To Next Page
Loading...
