Emerson Rosemount - Ordering Information; A.5 Ordering Information

206
Reference Manual
00809-0100-4021, Rev GC
Appendix A: Reference Data
April 2014
Reference data
A.5 Ordering information
Table A-3. Rosemount
®
3144P Temperature Transmitter Ordering Information
★ The Standard offering represents the most common options. The starred options (★) should be selected for best delivery.
The Expanded offering is subject to additional delivery lead time.
Model Product description
3144P Temperature Transmitter
Housing style Material
Conduit entry
size
Standard Standard
D1 Field Mount Housing, Dual-Compartment Housing Aluminum
1
/2–14 NPT ★
D2 Field Mount Housing, Dual-Compartment Housing Aluminum M20 x 1.5 (CM20) ★
D3 Field Mount Housing, Dual-Compartment Housing Aluminum PG 13.5 (PG11) ★
D4 Field Mount Housing, Dual-Compartment Housing Aluminum JIS G
1
/2 ★
D5 Field Mount Housing, Dual-Compartment Housing Stainless Steel
1
/2–14 NPT ★
D6 Field Mount Housing, Dual-Compartment Housing Stainless Steel M20 x 1.5 (CM20) ★
D7 Field Mount Housing, Dual-Compartment Housing Stainless Steel PG 13.5 (PG11) ★
D8 Field Mount Housing, Dual-Compartment Housing Stainless Steel JIS G
1
/2 ★
Transmitter output
Standard Standard
A 4-20 mA with digital signal based on HART protocol ★
F FOUNDATION fieldbus digital signal (includes 3 AI function block and Backup Link Active Scheduler) ★
Measurement configuration
Standard Standard
1 Single-Sensor Input ★
2 Dual-Sensor Input ★
Product certifications
Standard Standard
NA No Approval ★
E5 FM Explosion-proof, Dust Ignition-Proof, and Non-incendive approval ★
I5
(1)
FM Intrinsically Safe and Non-incendive (includes standard IS and FISCO for fieldbus units) ★
K5
(1)
FM IS, Non-incendive & Explosion-proof combo (includes standard IS and FISCO for fieldbus units) ★
KB
(1)
FM and CSA IS, Explosion-proof, and Non-incendive combo (includes standard IS and FISCO for FF
units)
★
I6
(1)
CSA Intrinsically Safe/FISCO and Division 2 (includes standard IS and FISCO for fieldbus units) ★
K6
(1)
CSA IS, FISCO Division 2 and Explosion-proof combo (includes standard IS, FISCO for fieldbus units) ★
E1 ATEX Flameproof approval ★
N1 ATEX type n approval ★
I1
(1)
ATEX intrinsic safety approval (includes standard IS and FISCO for fieldbus units) ★