6
Reference Manual
00809-0100-4021, Rev GC
Section 1: Introduction
April 2014
Introduction
1.4 3144P revisions
HART
The initial release of the 3144P HART was device revision 3. Each additional revision had
incremental improvements.
Table 1-1 summarizes these changes.
Table 1-1. HART 3144P Revisions
Software release
date
Identify device Field device driver Review instructions
NAMUR
software
revision
HART
software
revision
(1)
(1) NAMUR Software Revision is located in the hardware tag of the device. HART Software Revision can be read using a HART capable
configuration tool.
HART
universal
revision
(2)
(2) Device Driver file names use Device and DD Revision, e.g. 10_07. HART Protocol is designed to enable legacy driver revisions to continue
to communicate with new HART devices. To access this functionality, the new device driver must be downloaded. It is recommended to
download the new device driver to ensure new functionality.
Device
revision
Manual document
number
April-2012 1.1.1 2
7 6
(3)
(3) HART Revision 5 and 7 Selectable, Thermocouple Degradation Diagnostic, Min/Max Tracking.
FOUNDATION fieldbus
The following table summarizes the 3144P fieldbus revision history.
00809-0100-4021
5 5
(3)
Feb-2007 N/A 1 5 4 00809-0100-4021
Dec 2003 N/A N/A 5 3 00809-0100-4021
Table 1-2. FOUNDATION fieldbus 3144P Revisions
Device
rev.
Software
rev.
Hardware
rev.
Description
Date
Rev 1 1.00.011 5 Initial release Mar. 2004
Rev 1 1.00.024 5 Minor product maintenance, software Sep. 2004
Rev 1 1.00.024 6 Minor product maintenance, hardware Dec. 2004
Rev 1 1.01.004 6 Software update Oct. 2005
Rev 1 1.01.010 7
Component obsolescence hardware change and
software to support the hardware change.
Feb. 2007
Rev 2 2.02.003 7
FF Sensor and Process Diagnostic Release (D01):
Thermocouple Degradation Diagnostic and
Minimum and Maximum Temperature Tracking
Nov. 2008
To Next Page
Loading...
