130
Reference Manual
00809-0100-4021, Rev GC
Section 3: HART commissioning
April 2014
HART® commissioning
6. When prompted, select which set of coefficients you would like to enter for that sensor.
Choose between 1 R0, A, B, C, and 2 R0, Alpha, Beta, Delta.
7. When prompted, enter the desired values for each coefficient.
8. When you are done entering in these coefficients, another summary screen will appear.
Review this information, and when you are satisfied, press OK.
9. The method is complete, select 3 Exit to exit the method if you are satisfied.
To Next Page
Loading...
