208
Reference Manual
00809-0100-4021, Rev GC
Appendix A: Reference Data
April 2014
Reference data
External ground
Standard Standard
G1 External Ground Lug Assembly (See “External ground screw assembly” on page 193.) ★
Transient protector
Standard Standard
T1 Integral Transient Protector ★
Software configuration
Standard Standard
C1
(2)
Custom Configuration of Date, Descriptor and Message (Requires CDS with order) ★
Line filter
Standard Standard
F5 50 Hz Line Voltage Filter ★
Alarm level configuration
Standard Standard
A1 NAMUR Alarm and Saturation Levels, High Alarm ★
CN NAMUR Alarm and Saturation Levels, Low Alarm ★
Low alarm
Standard Standard
C8 Low Alarm (Standard Rosemount Alarm and Saturation Values) ★
Sensor trim
Standard Standard
C2 Transmitter-Sensor Matching – Trim to PT100 RTD Calibration Schedule (CVD constants) ★
Expanded
Expanded
C7 Trim to Non-Standard Sensor (Special Sensor–Customer must provide sensor information)
5-Point calibration
Standard Standard
C4 5-Point Calibration (Requires the Q4 option code to generate a Calibration Certificate) ★
Calibration certification
Standard Standard
Q4 Calibration Certificate (3-Point Calibration) ★
QP Calibration Certificate and Tamper Evident Seal ★
Table A-3. Rosemount
®
3144P Temperature Transmitter Ordering Information
★ The Standard offering represents the most common options. The starred options (★) should be selected for best delivery.
The Expanded offering is subject to additional delivery lead time.
To Next Page
Loading...
