©2020 EMS Ltd. All rights reserved Page 16 of 36 MK349-0001-99 (Issue 1) 22/10/2020 AJM
SmartCell WZM
System Normal
14:18 Access
For Access
Enter Code:_
Press To Complete
* Welcome Service *
Access Level 3
Now Available
All Buttons Active
View System Status
Maintenance/Test
Device Options
WZM Settings
Engineer menu entry
The following steps are required to access the engineer menu (access
level 3).
With the SmartCell WZM in its normal
state the screen will display:
Press the button and the screen will
display:
Enter the engineer PIN code (default
‘333333’), then press the button to
confirm. The screen will display:
Followed by:
All engineer menus are now available. You can now:
Set the time & date
Configure the WZM
Program devices to the system
Enter device text
Configure devices, i.e. device sensitivities, sounder tones etc.
To Next Page
Loading...
Need help?
General