©2020 EMS Ltd. All rights reserved Page 31 of 36 MK349-0001-99 (Issue 1) 22/10/2020 AJM
View System Status
Maintenance/Test
Device Options
WZM Settings
Panel Type
Sounder Options
Device Indicator
Off When Silenced
Off When Reset
Off When Silenced
Off When Reset
From access level 3 (as previously shown
on page 16), press the button until
the screen displays:
Press the button and the screen will
display:
Press the button until the screen will
displays:
Press the button and the screen will
display:
Press the button until the screen will
displays:
Press the button and the screen will
display:
Device indicator operation
This feature is only available when the ‘Panel Type’ is set to
‘Addressable’. As default, the device LED indicators are switched ‘Off
When Silenced’ (upon receipt of a silence command signal from the
control panel). Alternatively ‘Off When Reset’ can be selected (where the
device LED indicators switch off upon the receipt of a reset command
signal from the control panel, by following the steps below.
Panel Type
Sounder Options
Device Indicator
Fire Status
Turned Off
When Reset
To Next Page
Loading...
Need help?
General