EMS SmartCell User Manual

©2020 EMS Ltd. All rights reserved Page 28 of 36 MK349-0001-99 (Issue 1) 22/10/2020 AJM
View System Status
Maintenance/Test
Device Options
WZM Settings
Panel Type
Sounder Options
Device Indicator
Default Tone Select
Sounder Duration
Sounder Activation
Pulsed Output
Default Tone Select
Sounder Duration
Sounder Activation
Pulsed Output
Sounder activation method
As default, wireless sounders will only operate upon activation of the WZM’s
fire input. For ‘immediate mode’, so that sounders also operate upon the
activation of a wireless device, follow the steps below.
Panel Type
Sounder Options
Device Indicator
Panel Mode
Immediate Mode
Panel Mode
Immediate Mode
Sounder Activation
Set To
Immediate Mode
From access level 3 (as previously shown
on page 16), press the button until
the screen displays:
Press the button and the screen will
display:
Press the button until the screen will
displays:
Press the button and the screen will
display:
Press the button until the screen will
displays:
Press the button and the screen will
display:
Press the button until the screen will
displays:
Press the button and the screen will
display:
3
3
3
3

EMS SmartCell Specifications

General

Brand	EMS
Model	SmartCell
Category	Monitor
Language	English