EMS SmartCell - Test Devices; Function Testing Procedures for Devices

©2020 EMS Ltd. All rights reserved Page 33 of 36 MK349-0001-99 (Issue 1) 22/10/2020 AJM
Test devices
Every device should be function tested, to ensure correct functionality.
Smoke detectors should be tested using a smoke detector tester
and
in accordance with local codes of practice.
Heat detectors should be tested using a heat detector tester and
in accordance with local codes of practice.
Call Points should be tested
in accordance with local codes of
practice
.
Sounder operation should also be tested
in accordance with
local codes of practice
.
Input / Output devices should also be tested in conjunction with
associated 3rd party equipment and
in accordance with local
codes of practice
.
See overleaf for additional WZM testing features.