To Next Page

To Previous Page

Menu Selection Available options

Text Description

Detection

Smoke Sen

Heat Sen

Sound Volume

Self Sound

Audio/Visual

O/P 1 OFF

O/P 2 OFF

Refer to the ‘Device location text’ section overleaf.

Detection selection of ‘Dual’ (smoke & heat),

‘Smoke Only’ or ‘Heat Only’.

Smoke sensitivity selection of; ‘Normal*†’ and

‘Normal + AVF’. The AVF option allows additional

verification of the alarm condition before

reporting.

Heat sensitivity selection of; ‘58 °C static*†’, ‘58 °C

rate of rise*’, ‘72 °C static*’, ‘72 °C rate of rise*’.

Allows device sounder levels of; ‘High’ or ‘Low’.

When enabled, the device will sound upon local

alarm detection, whilst wireless communication

with the WZM is lost.

Allows device sounder and beacon selection of;

sounder & beacon, sounder only and beacon only.

Choose to switch the device’s ‘Output 1’ oﬀ, when

either the ‘silence’ or ‘reset’ button is pressed.

Choose to switch the device’s ‘Output 2’ oﬀ, when

either the ‘silence’ or ‘reset’ button is pressed.

*Approved EN54 sensitivities † Default dual sensitivities

EMS SmartCell User Manual

Other manuals for EMS SmartCell