Endress+Hauser Cerabar M - Page 83

Cerabar M, Deltabar M, Deltapilot M Commissioning with an operating menu (onsite display/FieldCare)
Endress+Hauser 83
8.4.7 Required parameters for Level measuring mode
Parameter name Description
Level selection (024)  ä 123
Unit before lin. (025)  ä 123
Height unit (026)  ä 123
Calibration mode (027)  ä 123
Empty calib. (028)  ä 124
Empty pressure (029)  ä 124
Empty height (030)  ä 124
Full calib. (031)  ä 124
Full pressure (032)  ä 124
Full height (033)  ä 124
Density unit (127)  ä 125
Adjust density (034)  ä 125
Process density (035)  ä 125
Level before lin. (019)  ä 125