Endress+Hauser Cerabar M - Page 92

Commissioning with an operating menu (onsite display/FieldCare) Cerabar M, Deltabar M, Deltapilot M
92 Endress+Hauser
8.7.2 Required parameters for differential pressure via Pressure
measuring mode
Parameter name Description
Measuring mode (005)  ä 119
Switch P1/P2 (163)  ä 121
High-pressure side (006) (Deltabar)  ä 121
Press. eng. unit (125)  ä 120
Corrected press. (172)  ä 122
Pos. zero adjust (007) (Deltabar M and gauge pressure sensor)  ä 120
Calib. offset (192) / (008) (absolute pressure sensor)  ä 120
Damping switch (164)  ä 120
Damping value (017)  ä 120
Pressure af. damp (111)  ä 122