Endress+Hauser Deltabar S PMD75 User Manual

Cerabar S/Deltabar S/Deltapilot S FOUNDATION Fieldbus Parameter description (Local operation and FieldCare)
Endress+Hauser 181
NORM FLOW UNIT (661)
Selection
Select the norm volume flow unit.
When a new flow unit is selected, all flow-specific parameters are converted and
displayed with the new unit within a flow mode (FLOW-MEAS. TYPE). When the flow
mode is changed, conversion is not possible.
Prerequisite:
• FLOW-MEAS. TYPE = Gas norm conditions
Options:
• Nm3/s, Nm3/min, Nm3/h, Nm3/day
•User unit, → see also this table, parameter description for CUSTOMER UNIT F and
CUST. UNIT. FACT. F
!
Note!
Following a change in the unit, the digital output value of the Analog Input value OUT
and the local operation or the MEASURED VALUE no longer display the same value.
→ See also parameter descriptions for XD SCALE, OUT SCALE and OUT value.
Factory setting:
Nm
3
/s
STD. FLOW UNIT (660)
Selection
Select the standard volume flow unit.
When a new flow unit is selected, all flow-specific parameters are converted and
displayed with the new unit within a flow mode (FLOW-MEAS. TYPE). When the flow
mode is changed, conversion is not possible.
Prerequisite:
• FLOW-MEAS. TYPE = Gas std. conditions
Options:
• Sm3/s, Sm3/min, Sm3/h, Sm3/day
• SCFS, SCFM, SCFH, SCFD
•User unit, → see also this table, parameter description for CUSTOMER UNIT F and
CUST. UNIT. FACT. F
!
Note!
Following a change in the unit, the digital output value of the Analog Input value OUT
and the local operation or the MEASURED VALUE no longer display the same value.
→ See also parameter descriptions for XD SCALE, OUT SCALE and OUT value.
Factory setting:
Sm
3
/s
MASS FLOW UNIT (571)
Selection
Select the mass flow unit.
When a new flow unit is selected, all flow-specific parameters are converted and
displayed with the new unit within a flow mode (FLOW-MEAS. TYPE). When the flow
mode is changed, conversion is not possible.
Prerequisite:
• FLOW-MEAS. TYPE = Mass p. cond.
Options:
• g/s, kg/s, kg/min, kg/min, kg/h
• t/s, t/min, t/h, t/day
•oz/s, oz/min
• lb/s, lb/min, lb/h
• ton/s, ton/min, ton/h, ton/day
•User unit, → see also the following parameter descriptions for CUSTOMER UNIT F
and CUST. UNIT. FACT. F
!
Note!
Following a change in the unit, the digital output value of the Analog Input value OUT
and the local operation or the MEASURED VALUE no longer display the same value.
→ See also parameter descriptions for XD SCALE, OUT SCALE and OUT value.
Factory setting:
kg/s
Table 14: OPERATING MENU → SETTINGS → BASIC SETUP "Flow"
Parameter name Description

Endress+Hauser Deltabar S PMD75 Specifications

General

Brand	Endress+Hauser
Model	Deltabar S PMD75
Category	Measuring Instruments
Language	English