Cerabar S/Deltabar S/Deltapilot S FOUNDATION Fieldbus Parameter description (FF configuration program)
Endress+Hauser 55
Sensor Serial Number/
SENSOR_SN
Display
Index: 22
Data type: visible string
Access: read only
Displays the serial number of the sensor (11 alphanumeric characters).
Sensor Calibration
Method/SENSOR_CAL_
METHOD
Selection
Index: 23
Data type: unsigned8
Access: OOS
For displaying and selecting the last sensor calibration mode used.
Sensor Calibration
Location/SENSOR_CAL_
LOC
Entry
Index: 24
Data type: visible string
Access: OOS
Enter the place the sensor was calibrated (32 alphanumeric characters).
Sensor Calibration Date/
SENSOR_CAL_DATE
Entry
Index: 25
Data type: date
Access: OOS
Enter the date and time the sensor was calibrated.
Sensor Calibration Who/
SENSOR_CAL_WHO
Entry
Index: 26
Data type: visible string
Access: OOS
Enter the name of the person who calibrated the sensor (32 alphanumeric characters).
Sensor Isolator Metal/
SENSOR_ISOLATOR_
MTL
Display
Index: 27
Data type: unsigned16
Access: read only
Displays the material of the process isolating diaphragm.
Sensor Fill Fluid/
SENSOR_FILL_FLUID
Display
Index: 28
Data type: unsigned16
Access: read only
Displays the filling fluid.
Pressure Transducer Block
Parameter Description
To Next Page
Loading...
