Temperature head transmitter 6 Commissioning
Endress+Hauser 47
Max primary value
•V9H4
Display the maximum process value. The process value is accepted at the
beginning of the measurement.
H
Hint!
Max. process value will be changed to the actual process value on write.
On reset to factory default, the default value is entered.
-10000
Default values
•V9H5
Entry: 182 (Reset to factory default settings)
0
Output current
•V9H6
Display of the actual output current signal.
Simulation
•V9H7
Entry of simulation mode.
Entry: Off
On
Off
Current out (sim)
•V9H8
Entry of simulation value (current).
Entry: 3.58...21.7 mA
Security locking
•V9H9
Release code for setting up.
Entry: Lock = 0
Release = 281
281
Function group: USER INFORMATION
Tag number
•VAH0
Entry and display of measurement point description (TAG).
Entry: 8 characters
-
Descriptor
•VAH1
Entry and display of plant description.
Entry: 16 characters
-
Hardware Version
•VAH2
Display of unit version,
e.g.: 1.0000 indicates version 1.00.00.
Software Version
•VAH3
•
3
33
3 Software Rev.
Display of software version,
e.g.: 8010 indicates version 1.0.
Serial number
•VAH4
8-digit display of E+H device serial numbers (see legend plates on the
device).
1. Hint only for Commuwin II operating matrix
2. not for thermocouples (TC)
To Next Page
Loading...
