Endress+Hauser Levelflex M FMP40 - Page 105

Levelflex M FMP40 FOUNDATION Fieldbus Technical data
Endress+Hauser 105
10.1.7 Mechanical construction
Material Refer to TI00358F/00/EN, chapter "Material (not in contact with process)" and "Material (in
contact with process)".
Tolerance of probe length
Weight
Process connection See "Ordering structure", → ä 6.
Seal See "Ordering structure", → ä 6.
Probe See "Ordering structure", → ä 6.
Rod probes Rope probes
over 1 m
(3.2 ft)
3 m
(9.8 ft)
6 m
(20 ft)
1 m
(3.2 ft)
3 m
(9.8 ft)
6 m
(20 ft)
up to 1 m
(3.2 ft)
3 m
(9.8 ft)
6 m
(20 ft)
1 m
(3.2 ft)
3 m
(9.8 ft)
6 m
(20 ft)
admissible
tolerance (mm (in))
- 5
(- 0.2)
- 10
(- 0.4)
- 20
(- 0.8)
- 30
(- 1.2)
- 10
(- 0.4)
- 20
(- 0.8)
- 30
(- 1.2)
- 40
(- 1.6)
Levelflex M FMP40
+ rope probe
4mm
FMP40
+ rod or rope probe
6mm
FMP40
+ rod probe
16 mm
FMP40
coax probe
Weight for F12 or
T12 housing
Approx. 4 kg
+
Approx. 0.1 kg/m
probe length
+
weight of flange
Approx. 4 kg
+
Approx. 0.2 kg/m
probe length
+
weight of flange
Approx. 4 kg
+
Approx. 1.6 kg/m
probe length
+
weight of flange
Approx. 4 kg
+
Approx. 3.5 kg/m
probe length
+
weight of flange
Weight for F23
housing
Approx. 7.4 kg
+
Approx. 0.1 kg/m
probe length
+
weight of flange
Approx. 7.4 kg
+
Approx. 0.2 kg/m
probe length
+
weight of flange
Approx. 7.4 kg
+
Approx. 1.6 kg/m
probe length
+
weight of flange
Approx. 7.4 kg
+
Approx. 3.5 kg/m
probe length
+
weight of flange