Technical data Levelflex M FMP40 FOUNDATION Fieldbus
106 Endress+Hauser
10.1.8 Certificates and approvals
CE approval The measuring system meets the legal requirements of the applicable EC guidelines. These are listed
in the corresponding EC Declaration of Conformity together with the standards applied.
Endress+Hauser confirms successful testing of the device by affixing to it the CE mark.
Overfill protection WHG. See "Ordering structure", → ä 6 - (see ZE00256F/DE)
Telecommunications Complies with "Part 15" of the FCC rules for an "Unintentional Radiator". All probes meet the
requirements for a "Class A Digital Device".
Coax probes and probes mounted in closed metallic vessels also meet the requirement for a "Class
B Digital Device".
External standards and
guidelines
The European directives and standards applied can be taken from the associated EC Declarations of
Conformity. In addition, the following also applied for Levelflex M:
EN 60529
Protection class of housing (IP-code)
Namur - international user association of automation technology in process industries.
•NE21
Electromagnetic compatibility (EMC) of industrial process and laboratory control equipment.
•NE43
Standardization of the signal level for the failure information of digital transmitters.
To Next Page
Loading...
