Mounting Levelflex M FMP40 FOUNDATION Fieldbus
32 Endress+Hauser
Installation with remote electronic
• Wall and pipe bracket is contained in the scope of delivery and is already mounted
• Follow installation instructions, → ä 18
• Mount housing on a wall or pipe as shown in the diagram
L00-FMP4xxxx-17-00-00-en-015
!
Note!
The protective hose cannot be disassembled at these points (1).
The ambient temperature for the connecting line (2) between the probe and the electronics must
not be greater than 105 °C. The version with remote electronics consists of the probe, a connecting
cable and the housing. If they are ordered as a complete unit they will be delivered assembled and
cannot be separated.
150
ENDRESS+HAUSER
Levelflex M
65 78
ø129
85
150
ENDRESS+HAUSER
Levelflex M
65 78
ø129
85
52
52
150
max. 80
min. 30
96
94
94
88
88
123
2765
80
260
75
≥
ø76
1
1
4xø8,5
1
1
2
pipe
wall
Note min.
bend radius!
ø21.3
To Next Page
Loading...
