Levelflex M FMP40 FOUNDATION Fieldbus Mounting
Endress+Hauser 31
Installation for difficult to access process connections
For tight spaces or temperatures above that in the graphic, the electronics housing can be ordered
with distance pipe or connecting cable (seperate housing).
Installation with distance pipe
When installing, please observe the installation
instructions (→ ä 18) and the following points:
• After mounting, the housing can be turned
350°, in order make access to the display and
the connection compartment easier.
• The max. measuring range is reduced to
34 m.
L00-FMP4xxxx-17-00-00-de-014
400
Ø 60,3
Ø 76
To Next Page
Loading...
