Endress+Hauser Levelflex M FMP41C - 12 Function Group System Parameters (0 C); Function Tag No. (0 C0); Function Device Tag (0 C0), FOUNDATION Fieldbus Only; Function Profile Version (0 C1)

Levelflex M 12 Function group "system parameters" (0C)
Endress+Hauser 69
12 Function group "system parameters" (0C)
12.1 Function "tag no." (0C0)
You can define the tag number with this function.
User input:
• 16 alphanumeric characters for HART instruments (8 using the HART universal command)
• 32 alphanumeric characteristics for PROFIBUS PA instruments
12.2 Function "device tag" (0C0), FOUNDATION
Fieldbus only
This function displays the tag number.
12.3 Function "Profile Version" (0C1),
PROFIBUS PA only
The PA Profile version is shown using this function (Profile 3.0).
"
Caution!
This function is available for PROFIBUS PA devices only!
12.4 Function "protocol+sw-no." (0C2)
This function shows the protocol and the hardware and software version: Vxx.yy.zz.prot.
Display:
xx: hw-version
yy: sw-version
zz: sw-revision
prot: protocoll type (e.g. HART)
⇒
ENDRESS + HAUSER
E
+
–
⇒
ENDRESS + HAUSER
E
+
–
⇒
ENDRESS + HAUSER
E
+
–
⇒
ENDRESS + HAUSER
E
+
–