Levelflex M 12 Function group "system parameters" (0C)
Endress+Hauser 71
12.8 Function "download mode" (0C8)
This parameter defines which values are written to the instrument during a ToF Tool or
Commuwinn II configuration download.
Selection:
• parameter only
• param+cust.map
•mapping only
!
Note!
This parameter must not be described explicitly in ToF Tool. The various possibilities can be
selected from the download dialog.
⇒
ENDRESS + HAUSER
E
+
–
⇒
⇓
After 3 s, the following message appears
ENDRESS + HAUSER
E
+
–
To Next Page
Loading...
