Endress+Hauser Liquiphant FTL64 - Incoming Acceptance and Product Identification; Receiving and Inspecting the Device

Incoming acceptance and product identification Liquiphant FTL64 HART
10 Endress+Hauser
3.1 Product design
1
5
4
2
3 3
A0042420
 1 Product design
1 Housing with electronic insert and cover
2 Temperature spacer with gas-tight glass feedthrough → 2 lengths available, depending on the process
temperature
3 Process connection (flange or thread)
4 Probe design with compact version
5 Probe design, pipe extension
4 Incoming acceptance and product
identification
4.1 Incoming acceptance
Check the following during incoming acceptance:
 Are the order codes on the delivery note and the product sticker identical?
 Are the goods undamaged?
 Do the data on the nameplate match the ordering information on the delivery note?
 If required (see nameplate): are the Safety Instructions e.g. XA provided?
If one of these conditions is not met, please contact the manufacturer's sales office.