Endress+Hauser Liquiphant FTL64 - Sliding Sleeves for Various Operations; Sliding Sleeves for Unpressurized and High Pressure Use

Accessories Liquiphant FTL64 HART
52 Endress+Hauser
14.5 Sliding sleeves for unpressurized operation
Not suitable for devices with PFA (conductive) coating.
Switch point, infinitely adjustable.
22 (0.87)
18 (0.71)
G 1 A
(1 NPT)
G 1½ A
(1½ NPT)
M6 (3x)
M6 (3x)
19 (0.75)
19 (0.75)
55
3 3
41
A0037666
 31 Sliding sleeves for unpressurized operation p
e
= 0 bar (0 psi). Unit of measurement mm (in)
G 1, DIN ISO 228/I
• Material: 1.4435 (AISI 316L)
• Weight: 0.21 kg (0.46 lb)
• Order number: 52003978
• Order number: 52011888, approval: with inspection certificate EN 10204 - 3.1 material
NPT 1, ASME B 1.20.1
• Material: 1.4435 (AISI 316L)
• Weight: 0.21 kg (0.46 lb)
• Order number: 52003979
• Order number: 52011889, approval: with inspection certificate EN 10204 - 3.1 material
G 1½, DIN ISO 228/I
• Material: 1.4435 (AISI 316L)
• Weight: 0.54 kg (1.19 lb)
• Order number: 52003980
• Order number: 52011890, approval: with inspection certificate EN 10204 - 3.1 material
NPT 1½, ASME B 1.20.1
• Material: 1.4435 (AISI 316L)
• Weight: 0.54 kg (1.19 lb)
• Order number: 52003981
• Order number: 52011891, approval: with inspection certificate EN 10204 - 3.1 material
More detailed information and documentation are available:
• Product Configurator on the Endress+Hauser website www.endress.com
• Endress+Hauser sales organization www.addresses.endress.com
14.6 High pressure sliding sleeves
Not suitable for devices with PFA (conductive) coating.
• Switch point, infinitely adjustable
• Use in explosive atmospheres
• Seal package made of graphite
• Graphite seal available as spare part 71078875
• For G 1, G 1½: seal is included in the delivery